the field is mechanical engineering and 3d printing
please follow all the instructions!!!
Open‐source 3D printed sensors for hand strength assessment: Validation of low‐cost load cell and fabric sensor‐based systems.
Cutler, Claudia R.
Hamilton, Anita L.
Baines, Cheyenne M.
Clark, Ross A.
Australian Occupational Therapy Journal.
Date of Publication: 2018
Doi number: 10.1111/1440-1630.12494
You will review your article as needed to complete the followingreview. This review is to be part of a marketing white paper. Becauseyou are writing for an external audience be sure the tone, level oftechnical complexity, and readability of your document are appropriatefor this type of professional document. What do I mean? You areaddressing professionals but not engineers or computer scientists:
- be specific and precise in what you say, they do not have time toguess what you are saying. Be sure your text is well written by readingit out loud to yourself and completing an advanced grammar check.
- Talk to them in words they will understand, and avoid or define technical language.
- Organize what you are staying so that the audience understands and follows your ideas. Use topic sentences (Links to an external site.).
Title of your review
While this will be at the top of your review, it will likely beeasier to create after you have completed the rest of the elements. Thetitle must concisely and precisely let an audience know what you aredoing and what the topic is. Titles that are clear, brief, andinteresting are more likely to get someone to read what is below them. Hint: You are not doing the research, you are reviewing it with a particular focus.
Title of the journal article, the authors, and the journal it was published in.
State this in a sentence.
On the line below your title put “by” with your name after it.
This is a concise statement of the purpose of the study in yourarticle. The information you need for this is generally found in theabstract and the end of the introduction.
This is a concise statement of the findings of the study in yourarticle. The information you need for this is generally found in theabstract and the findings/conclusion/analysis section of the article.
Data used for the Research
The section describes the data used for the research, this does notinclude the analysis done on the data as part of the research. Theinformation you need for this section is found in the methods section ofthe document. It should include answers to most if not all of thefollowing questions:
- Where was the data obtained from? This only applies to researcharticles where the researchers obtained data from an external source.
- How was the data collected? This applies to research articles wherethe researchers collected the data themselves. It usually includes whereor from what the data were collected, how much data are included, whattypes of data are collected.
Statistical Analysis Review
In this section, you will document the statistical method that wasused in the study. The information you need for this section is found inthe methods section of the article. While you will want to provide somecontext on how the statistics you are reviewing fit into the research,this is not intended to be a step-by-step review of the entire researchprocess. Use as many of the foundational terms from the first twoconceptual assignments as apply to your work and include:
- Identify the statistical method(s) used in this work in terms of thefoundational probability and statistics terms discussed in your firsttwo concept assignments (CA2.1 and CA2.2)
- Identify the statistical method(s) used in the study, what thatmethod does (in general) and why that was useful in this research
- Identify what researchers learned because of using the statistical method(s).
Evaluation of the Article’s Text
In this section, you will evaluate the audience to whom the articlecommunicates. You will use the tone and language of the document toidentify and document what audience(s) will be able to understand andvalue this article. How can you tell this? Is the article effective atcommunicating the material to them? Then, evaluate if this audience isappropriate for this material. Could this material, in a modifiedformat, be valuable to another audience? If so, what would need tochange to address that audience effectively? If not, why would it not beappropriate for other audiences?
Evaluation of the Article’s Graphics
In this section, you will evaluate the effectiveness of the types ofgraphics used in the document and their placement relative to theirdiscussion in the text. Identify what types of graphics are used, beingspecific about types of graphs (Links to an external site.)used, and their effectiveness for the information they were conveying.Do all the graphics have numbers and titles? Do all graphics have thelabels needed to identify all their elements? Are they well done and ofan appropriate size to be readable? Could they be communicated in amore clear way? What way do you think that would be?
Are the graphics located in the article in close proximity to wherethe topic they support is discussed? Does their location in the articlemake them more or less useful to the topic being discussed?
If your article does not have graphics, discuss what could have beenincluded to make the work more clear. Be specific in types of graphics.Where in the article they should be located, and why?
Contribution of Research
In this section, you will talk to your potential client and informthem of the significance of this research and how this statistical toolcan be of value to them in meeting their goals and objectives. Thecontribution of the research is generally found in thediscussion/conclusion/implications for the field section of the article.
Revision and Editing
This review will be your case contribution to your group’s whitepaper. As such, it needs to be well written. Format the documentclearly and consistently and be sure it is written well. I recommendthat you read your document out loud to yourself to make sure what youare saying is complete and the ideas flow. When you are happy with it,complete a grammar and spelling check before handing it in.
This section will use APA formatting (Links to an external site.)for the reference list. You will have the reference for the article youare reviewing and any other resources you use (ex. you might use astatistics encyclopedia to help you describe the statistics method inyou article. The library has several that are available as e-books.).
This linked document provides an example of what that can look like – White Paper Example.
"Place your order now for a similar assignment and have exceptional work written by our team of experts, guaranteeing you A results."